Introduction
If you enjoy spending time outdoors and want to enhance your backyard experience, building a fire pit can be a fantastic addition. However, to ensure safety and prevent sparks from flying, it’s essential to have a fire pit screen. In this article, we will guide you through the process of making a fire pit screen, providing step-by-step instructions and necessary materials.
Materials Needed
Before you begin, gather the following materials:
1. Metal Mesh: Look for a metal mesh screen specifically designed for fire pits. It should be heat-resistant and have small enough openings to prevent embers from escaping.
2. Metal Frame: You will need a metal frame to hold the mesh screen. This can be made from steel or any other sturdy metal material.
3. Hinges and Latches: Hinges and latches will allow you to easily open and close the fire pit screen when needed.
4. Metal Cutting Tools: Depending on the type of metal you choose for the frame, you may need metal cutting tools such as a hacksaw or angle grinder.
5. Measuring Tape and Marker: These tools will help you accurately measure and mark the dimensions of the screen and frame.
Step-by-Step Instructions
Now that you have gathered all the necessary materials, follow these step-by-step instructions to make your fire pit screen:
Step 1: Measure the dimensions of your fire pit. You will need to know the diameter or length and width of the fire pit to create a screen that fits perfectly.
Step 2: Using the measurements from Step 1, mark and cut the metal frame pieces. Ensure that the frame is slightly larger than the fire pit’s dimensions to provide a secure fit.
Step 3: Assemble the metal frame by joining the pieces together using welding or metal brackets. Ensure that the frame is sturdy and secure.
Step 4: Measure and cut the metal mesh screen to fit the frame. Leave a small overlap to attach the mesh to the frame securely.
Step 5: Attach the metal mesh to the frame using screws or metal fasteners. Make sure the mesh is taut and securely attached to prevent any gaps.
Step 6: Attach hinges to one side of the frame, allowing the screen to open and close easily. Place latches on the opposite side to keep the screen securely closed when not in use.
Step 7: Test the fire pit screen by placing it over the fire pit. Ensure that it fits properly and covers the entire opening of the fire pit.
Conclusion
By following these step-by-step instructions, you can create a fire pit screen that will keep your backyard safe and enjoyable. Remember to prioritize safety and use heat-resistant materials to prevent any accidents. With your DIY fire pit screen, you can now enjoy the warmth and ambiance of a fire pit without worrying about sparks or embers escaping.
References
1. lowes.com – https://www.lowes.com/n/how-to/build-a-fire-pit
2. hgtv.com – https://www.hgtv.com/outdoors/outdoor-spaces/how-to-make-a-fire-pit-screen
3. familyhandyman.com – https://www.familyhandyman.com/project/how-to-build-a-fire-pit/
4. diynetwork.com – https://www.diynetwork.com/how-to/outdoors/structures/how-to-build-a-fire-pit
5. popularmechanics.com – https://www.popularmechanics.com/home/how-to-plans/how-to/a8148/how-to-build-a-fire-pit/
6. bobvila.com – https://www.bobvila.com/articles/how-to-build-a-fire-pit/
