How to program subaru garage door opener?

How to program subaru garage door opener?


Programming a Subaru garage door opener is a straightforward process that allows you to conveniently control your garage door with your vehicle. This article will guide you through the steps required to program your Subaru’s garage door opener, ensuring a seamless integration between your car and your garage.

Step 1: Determine Compatibility

Check compatibility: Before proceeding with the programming process, it’s essential to ensure that your Subaru’s built-in garage door opener is compatible with your specific garage door opener system. Consult your vehicle’s owner’s manual or contact Subaru customer support to verify compatibility.

Step 2: Gather Materials

Materials needed: To program your Subaru’s garage door opener, you will need the following materials:

1. Garage door opener remote: This is the handheld remote that operates your garage door opener system.
2. Vehicle owner’s manual: This contains the necessary instructions and information specific to your Subaru model.

Step 3: Locate the Garage Door Opener Buttons

Locate buttons: Depending on your Subaru model, the garage door opener buttons may be located in different areas of the vehicle. Common locations include the overhead console, driver-side sun visor, or rearview mirror. Consult your vehicle’s owner’s manual to find the exact location of the garage door opener buttons.

Step 4: Clear Existing Programming

Clear existing programming: If you have previously programmed your Subaru’s garage door opener and wish to reprogram it, you will need to clear the existing programming first. To do this, press and hold the two outer garage door opener buttons simultaneously until the indicator light starts flashing rapidly. This process may vary slightly depending on your Subaru model, so refer to your owner’s manual for precise instructions.

Step 5: Enter Programming Mode

Enter programming mode: Once the existing programming is cleared, you can enter programming mode on your Subaru’s garage door opener. Press and hold the desired garage door opener button (the one you want to program) while also holding the button on your garage door opener remote. Continue holding both buttons until the indicator light on the remote starts flashing rapidly.

Step 6: Program the Garage Door Opener

Program the opener: With your Subaru in programming mode and the garage door opener remote ready, it’s time to program the opener. Hold the remote close to the garage door opener buttons in your Subaru and press both the remote button and the corresponding garage door opener button simultaneously. Release both buttons when the indicator light on the remote stops flashing and remains illuminated. This indicates successful programming.

Step 7: Test the Garage Door Opener

Test the opener: After programming the garage door opener, it’s crucial to test its functionality. Park your Subaru within range of your garage door and press the programmed garage door opener button in your vehicle. The garage door should respond by opening or closing accordingly. If it doesn’t, repeat the programming process, ensuring that you follow the instructions precisely.


Programming your Subaru’s garage door opener is a simple process that enhances the convenience and functionality of your vehicle. By following the steps outlined in this article, you can seamlessly integrate your Subaru with your garage door opener system, allowing for effortless control from the comfort of your car.


– Subaru:
– Subaru Owner’s Manual: specific to your Subaru model