How to program lexus garage door opener?

How to program lexus garage door opener?


Programming a Lexus garage door opener allows you to conveniently control your garage door from the comfort of your vehicle. This article will guide you through the process of programming your Lexus garage door opener, providing step-by-step instructions and helpful tips to ensure a successful setup.

Gather the Required Materials

Before you begin programming your Lexus garage door opener, make sure you have the following materials:

1. Garage Door Opener Remote: This is the handheld remote that operates your garage door. Ensure that it is compatible with your garage door opener system.

2. Vehicle Owner’s Manual: This manual contains specific instructions for programming the garage door opener in your Lexus model. It is essential to have the correct manual for your vehicle.

Locate the Garage Door Opener Button

To program your Lexus garage door opener, you need to locate the button on your vehicle that will be used for programming. The button is typically located on the overhead console or the driver-side sun visor. Refer to your vehicle owner’s manual for the exact location of the button in your Lexus model.

Clear Existing Programming

Before programming a new garage door opener, you need to clear any existing programming from your vehicle’s system. This step ensures that there are no conflicts or interference between the old and new programming. Follow these steps to clear existing programming:

1. Press and hold the garage door opener button: Hold down the button until the indicator light starts flashing rapidly.

2. Release the button: Once the indicator light starts flashing, release the button.

Enter Programming Mode

After clearing the existing programming, you can now enter the programming mode on your Lexus vehicle. This mode allows your vehicle to learn the signal from your garage door opener remote. Follow these steps to enter programming mode:

1. Press and hold the desired button: Press and hold the button on your vehicle’s console or sun visor that you want to use to operate the garage door.

2. Observe the indicator light: The indicator light will start flashing slowly, indicating that the vehicle is in programming mode.

Program the Garage Door Opener Remote

Now that your vehicle is in programming mode, it’s time to program your garage door opener remote. Follow these steps to complete the programming process:

1. Press the button on your garage door opener remote: Press and hold the button on your remote that you want to use to open and close the garage door.

2. Aim the remote at the vehicle: While holding the button on the remote, aim it towards the overhead console or sun visor where the programming button is located.

3. Wait for the indicator light to flash rapidly: The indicator light on your vehicle will flash rapidly, indicating that the programming was successful.

4. Test the garage door opener: Press the programmed button on your vehicle to test if the garage door opens and closes properly.


Programming your Lexus garage door opener is a straightforward process that can be completed by following these step-by-step instructions. By gathering the necessary materials, locating the programming button, clearing existing programming, entering programming mode, and programming the remote, you can conveniently operate your garage door from your Lexus vehicle.


– vehicle owner’s manual