Introduction
Changing the filter on a Samsung refrigerator is an essential maintenance task that helps ensure the appliance continues to provide clean and fresh-tasting water and ice. This article will guide you through the process of changing the filter on your Samsung refrigerator, providing step-by-step instructions and helpful tips along the way.
Step 1: Identify the Filter Type
Before proceeding, it is important to identify the type of filter your Samsung refrigerator uses. Samsung refrigerators typically use either an internal or an external filter. Internal filters are located inside the fridge, while external filters are typically found behind the refrigerator, connected to the water supply line.
Step 2: Gather the Necessary Materials
Materials needed: Replacement filter, gloves (optional).
To change the filter, you will need a replacement filter that is compatible with your Samsung refrigerator model. It is essential to use genuine Samsung filters or certified compatible filters to ensure optimal performance and water quality. Additionally, wearing gloves can help maintain cleanliness during the process.
Step 3: Prepare the Refrigerator
Before replacing the filter, it is important to prepare the refrigerator. If your refrigerator has a filter indicator light, check if it is illuminated or if the filter icon on the display panel shows that the filter needs to be replaced. If the indicator is on, it is time to change the filter. If your refrigerator doesn’t have an indicator, it is recommended to replace the filter every six months.
Step 4: Replace the Internal Filter
If your Samsung refrigerator has an internal filter, follow these steps to replace it:
1. Open the refrigerator door and locate the filter housing. It is usually situated in the upper right or left corner of the refrigerator compartment.
2. Rotate the filter counterclockwise to unlock it. As you turn, you may hear a clicking sound.
3. Gently pull the old filter straight out.
4. Remove the protective cap from the new filter.
5. Insert the new filter into the housing, aligning the indicator mark on the filter with the indicator mark on the housing.
6. Rotate the filter clockwise until it locks into place. Again, you may hear a clicking sound.
7. Reset the filter indicator light by pressing and holding the “Alarm” or “Filter Reset” button (depending on the model) for 3-5 seconds until the indicator light changes or goes off.
Step 5: Replace the External Filter
If your Samsung refrigerator has an external filter, follow these steps to replace it:
1. Locate the external filter, typically positioned behind the refrigerator near the water supply line.
2. Turn off the water supply by twisting the shut-off valve clockwise.
3. Depress the water dispenser lever to release any pressure in the water line.
4. Rotate the filter counterclockwise to unlock it. As you turn, you may feel some resistance.
5. Pull the old filter straight out.
6. Remove the protective cap from the new filter.
7. Insert the new filter into the filter housing, rotating it clockwise until it locks into place.
8. Turn on the water supply by twisting the shut-off valve counterclockwise.
9. Run water through the dispenser for a few minutes to flush out any air or impurities.
Conclusion
Regularly changing the filter on your Samsung refrigerator is crucial for maintaining clean and fresh-tasting water and ice. By following the step-by-step instructions provided in this article, you can easily replace the filter and ensure the continued performance of your Samsung refrigerator.
References
– samsung.com
– manualslib.com
