Introduction
Changing the garage keypad code is an essential step in maintaining the security of your home. Whether you’ve recently moved into a new house or want to update your existing code for added security, knowing how to change the garage keypad code is crucial. In this article, we will guide you through the process, providing step-by-step instructions to ensure a smooth and successful code change.
Step 1: Locate the Control Panel
The first step in changing the garage keypad code is to locate the control panel. The control panel is typically located inside the garage, near the garage door opener motor. It is usually a small box with buttons or a digital display.
Step 2: Access the Control Panel
Once you have located the control panel, you need to access it. This may require removing a cover or entering a code to unlock the panel. Refer to your garage door opener’s manual for specific instructions on how to access the control panel.
Step 3: Identify the Learn Button
Inside the control panel, you will find a learn button. The learn button is used to program new codes into the garage door opener. It is typically a large button that may be labeled as “Learn” or “Program.” The color of the button may vary depending on the manufacturer.
Step 4: Press the Learn Button
To change the garage keypad code, you need to press and hold the learn button for a few seconds. This action will activate the programming mode of the garage door opener.
Step 5: Enter the New Code
Once the programming mode is activated, you can enter the new code on the garage keypad. The keypad is usually located outside the garage, near the garage door. Enter the new code carefully, ensuring that each digit is correctly inputted.
Step 6: Test the New Code
After entering the new code, it is essential to test it to ensure it works correctly. Close the garage door, wait a few seconds, and then enter the new code on the keypad. If the garage door opens, the new code has been successfully programmed.
Step 7: Re-Program Additional Remotes
If you have additional remotes or keypads that were programmed with the old code, you will need to re-program them with the new code. Refer to your garage door opener’s manual for instructions on how to re-program additional remotes.
Conclusion
Changing the garage keypad code is a simple process that can significantly enhance the security of your home. By following the steps outlined in this article, you can easily change the code and ensure that only authorized individuals have access to your garage.
References
– Chamberlain: www.chamberlain.com/support
– LiftMaster: www.liftmaster.com/support
– Genie: www.geniecompany.com/support
