Introduction
Leveling a whirlpool refrigerator is an essential task to ensure its proper functioning and longevity. A level refrigerator not only prevents doors from swinging open or closing on their own but also helps maintain the optimal performance of the appliance. In this article, we will guide you through the process of leveling a whirlpool refrigerator, providing step-by-step instructions and helpful tips.
Tools and Materials
Before starting the leveling process, gather the following tools and materials:
Tools:
– Bubble level
– Adjustable wrench or pliers
Materials:
– Wooden shims or leveling legs (provided with the refrigerator)
Step-by-Step Guide
Follow these steps to level your whirlpool refrigerator:
Step 1: Prepare the Refrigerator
1. Unplug the refrigerator from the power source.
2. Empty the contents of the refrigerator and freezer compartments to reduce weight.
Step 2: Locate the Leveling Legs
1. Locate the leveling legs at the front of the refrigerator. These legs are usually covered by a plastic or metal grille.
2. Remove the grille to access the leveling legs.
Step 3: Adjust the Leveling Legs
1. Place the bubble level on top of the refrigerator from side to side.
2. Adjust the leveling legs by turning them clockwise or counterclockwise using an adjustable wrench or pliers. Turning the legs clockwise raises the refrigerator, while turning them counterclockwise lowers it.
3. Continue adjusting the legs until the bubble in the level is centered.
Step 4: Check the Leveling
1. Place the bubble level on top of the refrigerator from front to back.
2. Repeat the leveling leg adjustment process if necessary, ensuring the bubble is centered in both directions.
Step 5: Secure the Leveling Legs
1. Once the refrigerator is level, place wooden shims under the leveling legs to prevent them from moving.
2. Alternatively, some refrigerators have locking nuts on the leveling legs. If your refrigerator has these, tighten the nuts to secure the leveling legs in place.
Tips for Leveling a Whirlpool Refrigerator
– Ensure the floor where the refrigerator is placed is level. If the floor is uneven, use shims to level it before leveling the refrigerator.
– Use caution when adjusting the leveling legs to prevent damage to the floor or the refrigerator.
– Check the level of the refrigerator periodically, especially after moving it or adjusting the legs.
– If you encounter any difficulties or are unsure about the leveling process, consult the refrigerator’s user manual or contact Whirlpool customer support for assistance.
Conclusion
Leveling a whirlpool refrigerator is a straightforward process that can be done with a few basic tools. By following the step-by-step guide provided in this article, you can ensure that your refrigerator is properly leveled, preventing any potential issues with its operation. Remember to periodically check the level of the refrigerator to maintain its optimal performance.
References
– whirlpool.com
– homedepot.com
– lowes.com
