How to change filter in samsung refrigerator?

How to change filter in samsung refrigerator?


Changing the filter in a Samsung refrigerator is an essential maintenance task to ensure clean and fresh-tasting water and ice. This article will guide you through the step-by-step process of changing the filter in your Samsung refrigerator, ensuring that you can do it easily and efficiently.

Step 1: Identify the Filter Type

Before you can change the filter in your Samsung refrigerator, you need to identify the filter type. Samsung refrigerators typically use either an internal or an external filter. Internal filters are located inside the refrigerator, while external filters are usually found behind the refrigerator, connected to the water supply.

Step 2: Gather the Necessary Materials

To change the filter in your Samsung refrigerator, you will need a few materials. These may include a replacement filter, a towel or cloth, and a container to catch any water that may spill during the process. It is crucial to use a genuine Samsung filter or a compatible one recommended by the manufacturer to ensure optimal performance.

Step 3: Prepare the Refrigerator

If you have an internal filter, you need to prepare the refrigerator before changing it. Locate the filter housing, which is usually in the upper right or left corner of the refrigerator compartment. Open the filter housing cover and remove any objects or items that may obstruct the filter replacement.

Step 4: Remove the Old Filter

Once the refrigerator is prepared, you can proceed to remove the old filter. For an internal filter, turn the filter counterclockwise until it is released from the filter housing. If you have an external filter, turn off the water supply and use a wrench to disconnect the filter from the water line.

Step 5: Install the New Filter

After removing the old filter, it’s time to install the new one. Take the new filter and align it with the filter housing. For an internal filter, insert the filter into the housing and turn it clockwise until it locks into place. If you have an external filter, connect it to the water line and tighten it with a wrench.

Step 6: Flush the Filter

To ensure the best water quality, it is recommended to flush the new filter before using it. Run several gallons of water through the dispenser to remove any carbon fines or air bubbles. This step will help eliminate any initial cloudiness or odd taste in the water.

Step 7: Reset the Filter Indicator

Most Samsung refrigerators have a filter indicator that notifies you when it’s time to replace the filter. After changing the filter, it’s important to reset the filter indicator to ensure accurate monitoring. Refer to your refrigerator’s user manual for specific instructions on how to reset the filter indicator.


Changing the filter in your Samsung refrigerator is a simple process that can significantly improve the quality of your water and ice. By following the steps outlined in this article, you can easily replace the filter and maintain a clean and fresh-tasting water supply.