How to get transmission fluid off driveway?

How to get transmission fluid off driveway?


Transmission fluid spills on driveways can be an unsightly and challenging mess to clean up. Whether it’s due to a leaky vehicle or an accidental spill, it’s important to address the issue promptly to prevent stains and damage to the driveway. In this article, we will explore effective methods to get transmission fluid off your driveway, ensuring a clean and well-maintained surface.

Materials needed

Before diving into the cleaning process, gather the following materials:

– Absorbent materials: such as cat litter, baking soda, or sawdust.
– Cleaning solution: dish soap, laundry detergent, or a commercial degreaser.
– Scrub brush or broom.
– Garden hose or pressure washer.
– Protective gloves and goggles.

Step-by-step cleaning process

Step 1: Absorb the excess fluid: Begin by using absorbent materials to soak up as much transmission fluid as possible. Sprinkle cat litter, baking soda, or sawdust generously over the affected area. Gently press down with your foot or a broom to help the absorbent material penetrate the fluid. Leave it on for several hours or overnight to allow it to absorb the oil.

Step 2: Sweep or vacuum: Once the absorbent material has done its job, sweep or vacuum it up. Use a broom or a vacuum cleaner with a hose attachment to remove the soiled absorbent material. Dispose of it properly according to local regulations.

Step 3: Prepare the cleaning solution: In a bucket, mix a solution of warm water and a suitable cleaning agent. Dish soap, laundry detergent, or a commercial degreaser can be effective options. Follow the product instructions for the appropriate dilution ratio.

Step 4: Apply the cleaning solution: Pour the cleaning solution directly onto the remaining transmission fluid stain. Use a scrub brush or broom to agitate the solution and work it into the stain. Allow the cleaning solution to sit on the stain for a few minutes to break down the oil.

Step 5: Scrub the stain: Scrub the stain vigorously using the scrub brush or broom. Apply firm pressure to help lift the oil from the surface. Continue scrubbing until the stain starts to fade.

Step 6: Rinse the area: Rinse the driveway thoroughly with a garden hose or pressure washer. Start from the top of the stain and work your way down, ensuring that all the cleaning solution and residue are washed away. Pay attention to any remaining spots and repeat the cleaning process if necessary.

Step 7: Dry the driveway: Allow the driveway to air dry or use a clean towel or mop to absorb any excess water. Avoid walking or driving on the wet surface until it is completely dry.


Cleaning transmission fluid off a driveway may seem like a daunting task, but with the right materials and a systematic approach, it can be effectively managed. Remember to absorb the excess fluid, sweep or vacuum the area, apply a suitable cleaning solution, scrub the stain, rinse thoroughly, and allow the driveway to dry. Prompt action and regular maintenance will help keep your driveway looking clean and free from unsightly transmission fluid stains.


– Popular Mechanics:
– The Family Handyman:
– Bob Vila: