Introduction
Measuring a garage door accurately is essential when it comes to replacing or installing a new one. Whether you are a homeowner or a professional, knowing how to measure a garage door properly will ensure a perfect fit and smooth operation. In this article, we will guide you through the process of measuring a garage door step by step, so you can confidently proceed with your project.
Measuring the Width
The first step in measuring a garage door is determining its width. To do this, you will need a measuring tape or a ruler. Start by measuring the width of the opening at the widest point. Take the measurement from the inside of the left jamb to the inside of the right jamb. Make sure to measure both at the top and bottom of the opening, as garage openings can sometimes be uneven. Record the largest measurement as the width of your garage door.
Measuring the Height
Next, you need to measure the height of the garage door opening. Again, use a measuring tape or a ruler for this task. Measure from the floor to the top of the opening, recording the measurement in inches. It is important to measure in multiple locations, as floors are not always level. Take the largest measurement as the height of your garage door.
Measuring the Headroom
The headroom is the space between the top of the opening and the ceiling or any obstruction. This measurement is crucial to ensure that there is enough space for the garage door hardware and the door itself to operate properly. Measure the distance from the top of the opening to the ceiling or obstruction. This measurement will determine the type of track system that can be installed. Consult the manufacturer’s guidelines to determine the required headroom for your chosen garage door.
Measuring the Sideroom
The sideroom is the space on each side of the opening between the jamb and any obstructions. This measurement is important to ensure that there is enough space for the garage door tracks and hardware. Measure the distance from the edge of the opening to the nearest obstruction on each side. This measurement will determine the width of the garage door panels that can be installed. Again, consult the manufacturer’s guidelines to determine the required sideroom for your chosen garage door.
Measuring the Backroom
The backroom is the distance from the opening to the back wall of the garage. This measurement is necessary to determine the maximum door height that can be installed. Measure the distance from the opening to the back wall, recording the measurement in inches. This measurement will also help determine the type of garage door opener that can be installed, as it needs enough space to operate properly.
Conclusion
Accurately measuring a garage door is crucial for a successful installation or replacement. By following the step-by-step process outlined in this article, you can ensure that your garage door will fit perfectly and operate smoothly. Remember to measure the width, height, headroom, sideroom, and backroom to get the most accurate measurements. If you are unsure about any details, consult the manufacturer’s guidelines or seek professional assistance.
References
– Clopay: www.clopaydoor.com
– Amarr: www.amarr.com
– Wayne Dalton: www.wayne-dalton.com
