Introduction
Turning on a fire pit can be a simple and enjoyable process, allowing you to create a cozy and warm atmosphere in your outdoor space. Whether you have a gas fire pit or a wood-burning fire pit, this article will guide you through the steps to safely and effectively turn on your fire pit.
Gas Fire Pit
Materials needed: Gas fire pit, propane tank, lighter or match.
1. Check the propane tank: Ensure that the propane tank connected to your gas fire pit has enough fuel. If the tank is empty or nearly empty, replace it with a full tank.
2. Open the gas valve: Locate the gas valve on your fire pit. It is usually located near the base or on the side. Turn the valve counterclockwise to open it fully. This will allow the propane gas to flow to the fire pit.
3. Ignite the fire pit: Use a long lighter or a match to ignite the flame. Hold the flame near the burner or ignition point of the fire pit while turning the control knob to the “ignite” or “on” position. This will create a spark that will ignite the gas and start the fire.
4. Adjust the flame: Once the fire is lit, you can adjust the flame height using the control knob. Turn it clockwise to increase the flame or counterclockwise to decrease it. Find the desired flame height that suits your preference.
Wood-Burning Fire Pit
Materials needed: Wood logs, kindling, fire starters, lighter or match.
1. Prepare the fire pit: Ensure that your fire pit is clean and free from any debris or ashes from previous fires. Remove any leftover wood or ashes before starting a new fire.
2. Arrange the wood: Place the larger wood logs at the bottom of the fire pit in a crisscross pattern, leaving enough space for air circulation. On top of the logs, add a layer of smaller kindling or twigs. Finally, place a few fire starters on top of the kindling.
3. Ignite the fire starters: Use a long lighter or a match to ignite the fire starters. Place the flame near the fire starters and wait for them to catch fire. Once they are burning steadily, the flames will spread to the kindling and eventually to the larger wood logs.
4. Add more wood: As the fire grows, you can add more wood logs to keep it burning. Place the logs on top of the burning kindling, ensuring that they are positioned securely to prevent them from rolling out of the fire pit.
5. Maintain the fire: To keep the fire going, periodically add more wood logs as needed. Use a poker or tongs to rearrange the logs and promote better airflow. Remember to never leave the fire unattended and always follow safety precautions.
Conclusion
Turning on a fire pit, whether it is a gas fire pit or a wood-burning fire pit, can be a straightforward process when done correctly. By following the steps outlined in this article, you can safely enjoy the warmth and ambiance of a fire pit in your outdoor space.
References
– FirePitsDirect.com
– HomeDepot.com
– TheSpruce.com
