How to reset ice maker on samsung refrigerator?

How to reset ice maker on samsung refrigerator?


If you own a Samsung refrigerator with an ice maker and are experiencing issues with it, you may need to reset the ice maker. Resetting the ice maker can help resolve common problems such as ice not being produced or dispensed properly. In this article, we will guide you through the steps to reset the ice maker on your Samsung refrigerator.

Checking for Power and Water Supply

Before resetting the ice maker, it is important to ensure that your refrigerator has a proper power and water supply. Make sure that the refrigerator is plugged in and receiving power. Additionally, check that the water supply to the refrigerator is turned on and there are no kinks or clogs in the water line.

Locating the Reset Button

To reset the ice maker on a Samsung refrigerator, you will need to locate the reset button. The location of the reset button may vary depending on the model of your refrigerator. In most Samsung refrigerators, the reset button is located on the control panel inside the refrigerator, near the ice maker. Look for a small button labeled “Reset” or “Ice Maker Reset.”

Resetting the Ice Maker

Once you have located the reset button, follow these steps to reset the ice maker:

1. Press and hold the reset button for approximately 10 seconds. You may need to use a small pointed object, such as a pen or a paperclip, to press the button.

2. After holding the reset button for 10 seconds, release it.

3. Wait for a few minutes to allow the ice maker to reset and go through its startup process.

4. Once the ice maker has reset, you should hear a chime or see a notification on the control panel indicating that the reset was successful.

Additional Troubleshooting Steps

If resetting the ice maker does not resolve the issue, there are a few additional troubleshooting steps you can try:

1. Check the ice maker’s water filter: A clogged or dirty water filter can affect the ice maker’s performance. Replace the water filter if necessary.

2. Check the water inlet valve: The water inlet valve controls the flow of water to the ice maker. If it is faulty, it may need to be replaced.

3. Inspect the ice maker’s components: Check for any visible signs of damage or blockages in the ice maker’s components. Clean or replace any damaged parts as needed.

4. Contact Samsung support: If the issue persists, it is recommended to contact Samsung support for further assistance. They can provide specific troubleshooting steps based on your refrigerator model.


Resetting the ice maker on your Samsung refrigerator can help resolve common issues with ice production and dispensing. By following the steps outlined in this article, you can easily reset the ice maker and potentially fix the problem. If the issue persists, it is advisable to contact Samsung support for further assistance.