Introduction
Resetting a Craftsman garage door opener may be necessary if you encounter issues such as a malfunctioning remote control or a forgotten keypad code. This article will guide you through the steps to reset your Craftsman garage door opener, ensuring that it functions properly and provides you with the convenience and security you need.
Identify the Type of Craftsman Garage Door Opener
Before proceeding with the reset process, it is important to determine the type of Craftsman garage door opener you have. Craftsman offers different models, and the reset procedure can vary depending on the specific model. Refer to the owner’s manual or check the label on the back of the opener unit to identify the model number.
Resetting a Craftsman Garage Door Opener with a Keypad
If your Craftsman garage door opener has a keypad, follow these steps to reset it:
1. Locate the “Learn” button on the opener unit. It is usually found near the antenna wire or the light bulb socket.
2. Press and hold the “Learn” button until the indicator light on the opener unit turns on.
3. Within 30 seconds, enter a new four-digit code on the keypad.
4. Press and hold the enter button on the keypad until the opener unit’s indicator light blinks twice.
5. Test the new code by entering it on the keypad and ensuring that the garage door opens and closes properly.
Resetting a Craftsman Garage Door Opener with a Remote Control
To reset a Craftsman garage door opener with a remote control, follow these steps:
1. Locate the “Learn” button on the opener unit.
2. Press and release the “Learn” button. The indicator light on the opener unit will turn on.
3. Within 30 seconds, press and hold the button on the remote control that you want to program.
4. Continue holding the button until the opener unit’s indicator light blinks once and then remains steady.
5. Test the remote control by pressing the programmed button and ensuring that the garage door opens and closes properly.
Resetting a Craftsman Garage Door Opener with a Wall Control Panel
If your Craftsman garage door opener has a wall control panel, follow these steps to reset it:
1. Locate the “Learn” button on the opener unit.
2. Press and release the “Learn” button. The indicator light on the opener unit will turn on.
3. Within 30 seconds, press and hold the light button on the wall control panel.
4. Continue holding the button until the opener unit’s indicator light blinks once and then remains steady.
5. Test the wall control panel by pressing the light button and ensuring that the garage door opens and closes properly.
Conclusion
Resetting a Craftsman garage door opener is a straightforward process that can help resolve common issues and ensure proper functionality. By following the specific steps for your model, whether it has a keypad, remote control, or wall control panel, you can easily reset the opener and regain control over your garage door.
References
– craftsman.com
– owner’s manual of Craftsman garage door opener model XYZ
