Introduction
Leveling a Whirlpool refrigerator is an essential step to ensure its proper functioning and longevity. A level refrigerator not only improves its aesthetic appeal but also prevents issues like door misalignment and uneven cooling. In this article, we will guide you through the process of leveling your Whirlpool refrigerator effectively.
Materials Needed
Before you begin, gather the following materials:
– A bubble level
– Adjustable wrench
– Screwdriver
– Wooden shims (if necessary)
Steps to Level a Whirlpool Refrigerator
Step 1: Preparation
1. Unplug the refrigerator from the power source to ensure safety.
2. Remove all items from the refrigerator and freezer compartments to lighten the load.
Step 2: Locate the Leveling Feet
1. Open the refrigerator doors and locate the leveling feet at the front of the appliance.
2. The Whirlpool refrigerator typically has two leveling feet, one on each side.
Step 3: Adjust the Leveling Feet
1. Place the bubble level on top of the refrigerator from side to side.
2. Check the level and note which side is higher.
3. Using an adjustable wrench, turn the leveling foot counterclockwise to raise that side of the refrigerator.
4. Continue adjusting until the bubble level indicates that the refrigerator is level from side to side.
Step 4: Check Front-to-Back Leveling
1. Move the bubble level to the front of the refrigerator.
2. Check the level and note if the refrigerator is tilted forward or backward.
3. If the refrigerator is tilted forward, raise the front leveling feet by turning them counterclockwise.
4. If the refrigerator is tilted backward, lower the front leveling feet by turning them clockwise.
5. Adjust the leveling feet until the bubble level indicates that the refrigerator is level from front to back.
Step 5: Verify the Level
1. Double-check the level from side to side and front to back to ensure the refrigerator is properly leveled.
2. Make any necessary adjustments to the leveling feet until the refrigerator is perfectly level.
Step 6: Secure the Leveling Feet
1. Once the refrigerator is level, tighten the lock nuts on the leveling feet to secure them in place.
2. Use a screwdriver or your hands to tighten the lock nuts firmly.
Conclusion
Leveling your Whirlpool refrigerator is a simple yet crucial task that ensures optimal performance and prevents potential issues. By following the steps outlined in this article, you can easily level your refrigerator and enjoy its benefits for years to come.
References
– whirlpool.com
– familyhandyman.com
– hunker.com
