Introduction
Changing the water filter in a Kenmore French door refrigerator is an essential maintenance task to ensure clean and fresh-tasting water. This article will provide step-by-step instructions on how to change the water filter in your Kenmore French door refrigerator, ensuring that you can enjoy clean and filtered water at all times.
Step 1: Determine the Type of Water Filter
Before you begin the process of changing the water filter, it is crucial to identify the type of filter your Kenmore French door refrigerator uses. Kenmore refrigerators typically use either a push-button or twist-in water filter. Check the user manual or the label on the water filter housing to determine the correct type.
Step 2: Gather the Necessary Materials
Materials needed: Replacement water filter, gloves (optional)
To change the water filter, you will need a replacement filter that is compatible with your Kenmore French door refrigerator model. It is recommended to use genuine Kenmore replacement filters for optimal performance. Additionally, wearing gloves during the process is optional but can help maintain cleanliness.
Step 3: Locate the Water Filter Housing
The next step is to locate the water filter housing in your Kenmore French door refrigerator. In most models, the water filter housing is located in the upper right-hand corner of the refrigerator compartment. Open the refrigerator doors and look for a small compartment with a filter icon or label.
Step 4: Remove the Old Water Filter
Caution: Before removing the old water filter, it is essential to turn off the water supply to the refrigerator. Locate the shut-off valve behind the refrigerator or under the sink and turn it off.
To remove the old water filter, follow these steps:
1. Push the release button (for push-button filters) or twist counterclockwise (for twist-in filters) to unlock the filter.
2. Gently pull the filter straight out.
3. Dispose of the old filter properly.
Step 5: Install the New Water Filter
Note: It is recommended to run water through the new filter for a few minutes before using it to flush out any carbon fines or air.
To install the new water filter, follow these steps:
1. Remove the protective cover from the new filter.
2. Align the filter with the filter housing and insert it into the housing.
3. Push the filter firmly until it locks into place with a click (for push-button filters) or twist clockwise until it locks (for twist-in filters).
Step 6: Reset the Water Filter Indicator
After installing the new water filter, it is important to reset the water filter indicator on your Kenmore French door refrigerator. The indicator light notifies you when it is time to replace the filter.
To reset the water filter indicator, follow these steps:
1. Press and hold the “Filter Reset” or “Reset” button on the control panel for 3-5 seconds.
2. Once the indicator light changes or goes off, release the button.
Step 7: Turn on the Water Supply
After completing the filter replacement and resetting the indicator, it is time to turn on the water supply to your Kenmore French door refrigerator. Locate the shut-off valve and turn it back on.
Conclusion
Regularly changing the water filter in your Kenmore French door refrigerator is essential for maintaining clean and fresh-tasting water. By following the step-by-step instructions provided in this article, you can easily change the water filter and ensure the continued quality of your drinking water.
References
– Kenmore: www.kenmore.com
– Kenmore Owner’s Manual: www.kenmore.com/support/manuals
