Introduction
Changing the code on a Chamberlain garage door keypad is a simple process that allows you to enhance the security of your garage. Whether you want to update the code for personal reasons or to revoke access from someone, this article will guide you through the steps to change the code on a Chamberlain garage door keypad.
Step 1: Locate the Learn Button
The first step in changing the code on a Chamberlain garage door keypad is to locate the “Learn” button on your garage door opener. This button is typically found on the back or side of the opener unit. It may be labeled as “Learn” or identified by a small square or circular button with an LED light next to it.
Step 2: Clear the Existing Code
To clear the existing code from the keypad, press and hold the “Learn” button on the garage door opener for about 6 seconds. The LED light next to the button will turn off, indicating that the existing code has been cleared.
Step 3: Enter the New Code
Once the existing code has been cleared, you can now enter the new code on the keypad. The process for entering the new code may vary depending on the model of your Chamberlain garage door opener. Generally, you will need to press the “Learn” button on the opener unit again, then enter the desired new code on the keypad within 30 seconds.
Step 4: Test the New Code
After entering the new code, it is important to test it to ensure it is working correctly. Stand outside the garage and close the door using the new code on the keypad. If the door closes successfully, wait a few seconds, then enter the new code again to open the door. Repeat this process a few times to ensure the new code is functioning properly.
Step 5: Additional Programming Options
Chamberlain garage door openers offer additional programming options that can enhance the security and functionality of your garage door. These options may include features such as setting temporary codes for visitors, enabling vacation mode, or adjusting the keypad backlight settings. Consult your Chamberlain garage door opener’s manual or the manufacturer’s website for instructions on how to access and utilize these additional programming options.
Conclusion
Changing the code on a Chamberlain garage door keypad is a straightforward process that can be done in a few simple steps. By following the steps outlined in this article, you can easily update the code on your garage door keypad and enhance the security of your garage.
References
– Chamberlain Support: support.chamberlain.com
– Chamberlain Official Website: chamberlain.com
