How to change battery in garage door opener keypad?

How to change battery in garage door opener keypad?


Changing the battery in a garage door opener keypad is a simple task that can be done by following a few easy steps. This article will guide you through the process, ensuring that your garage door opener keypad continues to function smoothly.

Step 1: Identify the Battery Type

Before you begin, it is essential to determine the type of battery your garage door opener keypad uses. Most keypads typically use either AA or AAA batteries. Check the user manual or the back of the keypad to find the specific battery type required.

Step 2: Prepare the Tools and Materials

To change the battery, you will need a few tools and materials. These include a screwdriver (usually Phillips or flathead), a new battery of the correct type, and a clean cloth or tissue to handle the battery.

Step 3: Locate the Battery Compartment

Next, locate the battery compartment on your garage door opener keypad. This is usually found on the back of the keypad. Use the screwdriver to remove the screws securing the battery compartment cover. Place the screws in a safe place to avoid losing them.

Step 4: Remove the Old Battery

Once the battery compartment cover is removed, you will see the old battery. Carefully remove the old battery from its slot, taking note of its orientation. It is important to handle the battery with care and avoid touching the metal contacts.

Step 5: Insert the New Battery

Take the new battery and insert it into the slot, ensuring that it is oriented correctly. The positive and negative terminals on the battery should align with the markings inside the battery compartment. Gently press the battery down to ensure it is secure.

Step 6: Replace the Battery Compartment Cover

After inserting the new battery, replace the battery compartment cover and secure it with the screws. Use the screwdriver to tighten the screws, but be careful not to overtighten them.

Step 7: Test the Keypad

Once the battery compartment cover is securely in place, it’s time to test the keypad. Press a few buttons to ensure that the keypad is functioning correctly. If the keypad does not respond or if the display is dim, double-check the battery orientation and ensure it is inserted correctly.


Changing the battery in a garage door opener keypad is a straightforward process that can be completed in a few simple steps. By following the instructions outlined above, you can ensure that your keypad continues to operate smoothly and reliably.


– Chamberlain:
– LiftMaster:
– Genie: