How to put baby in doona car seat?

How to put baby in doona car seat?


Putting a baby in a Doona car seat can be a simple and safe process when done correctly. This article will guide you through the steps to ensure your baby is securely and comfortably placed in a Doona car seat.

Step 1: Familiarize Yourself with the Doona Car Seat

Before attempting to put your baby in a Doona car seat, it’s important to familiarize yourself with the seat’s features and functions. Read the instruction manual provided by the manufacturer to understand how the seat works, including adjusting the straps, securing the base, and attaching it to a vehicle.

Step 2: Prepare the Doona Car Seat

Ensure that the Doona car seat is properly installed in your vehicle according to the manufacturer’s instructions. The seat should be securely attached to the base and positioned in the rear-facing position, as this is the safest orientation for infants.

Step 3: Adjust the Straps

Check the straps on the Doona car seat to ensure they are properly adjusted for your baby’s size. The shoulder straps should be at or below your baby’s shoulders, and the chest clip should be at armpit level. Adjust the straps as needed to achieve a snug but comfortable fit.

Step 4: Place Your Baby in the Doona Car Seat

Gently place your baby in the Doona car seat, ensuring that their back is against the seatback and their bottom is positioned all the way to the back of the seat. Make sure their head is supported and centered in the headrest area.

Step 5: Secure the Straps

Once your baby is properly positioned in the Doona car seat, secure the straps. Start by buckling the crotch strap between your baby’s legs and then fasten the shoulder straps. Ensure that the straps are snug but not too tight, allowing for some room for movement and breathing.

Step 6: Check for Proper Fit

After securing the straps, check for proper fit. The shoulder straps should be snug against your baby’s shoulders without digging into their skin. The chest clip should be positioned at armpit level, and you should not be able to pinch any excess strap material.

Step 7: Test for Stability

Give the Doona car seat a gentle shake to test its stability. It should not move more than an inch in any direction. If the seat feels loose or unstable, double-check the installation and straps to ensure everything is properly secured.


Putting a baby in a Doona car seat is a straightforward process when following these steps. By familiarizing yourself with the seat, properly adjusting the straps, and ensuring a secure fit, you can provide a safe and comfortable ride for your little one.


– Doona™ Official Website:
– Doona Car Seat Instruction Manual: