How to install evenflo car seat rear facing?

How to install evenflo car seat rear facing?


Installing a car seat correctly is crucial for the safety of your child while traveling. In this article, we will provide a step-by-step guide on how to install an Evenflo car seat rear facing. Following these instructions will help ensure that your child is secured properly and protected in the event of a collision.

Step 1: Read the Manual

Before starting the installation process, it is essential to thoroughly read the instruction manual that comes with your Evenflo car seat. The manual provides specific guidelines and important information that you need to know for proper installation. Familiarize yourself with the different components of the car seat and the specific instructions for rear-facing installation.

Step 2: Choose the Correct Position

Select a suitable seating position in your vehicle for the rear-facing installation. It is recommended to place the car seat in the back seat, preferably in the center position. This provides the most protection for your child in the event of a side impact collision. Ensure that the car seat is positioned securely on the vehicle seat and does not wobble or move excessively.

Step 3: Adjust the Recline Angle

Adjust the recline angle of the car seat according to the instructions provided in the manual. The correct recline angle ensures that your child’s head does not flop forward and obstruct their airway. Most Evenflo car seats have built-in recline indicators or adjustment mechanisms to help you achieve the proper angle.

Step 4: Install the Base

Install the car seat base securely in your vehicle using either the vehicle’s seat belt or the Lower Anchors and Tethers for Children (LATCH) system. Follow the instructions in the manual to properly thread the seat belt or attach the LATCH connectors to the designated anchor points. Ensure that the base is tightly secured and does not move more than an inch in any direction.

Step 5: Attach the Car Seat

Attach the car seat to the base by aligning the connectors on the bottom of the car seat with the corresponding slots on the base. Push the car seat down firmly until you hear a click or feel it lock into place. Give it a gentle tug to make sure it is securely attached.

Step 6: Secure the Child

Secure your child in the car seat by properly adjusting the harness straps. The straps should be threaded through the slots at or below your child’s shoulders. Ensure that the harness is snug, with no slack, and the chest clip is positioned at armpit level.

Step 7: Check for Proper Installation

Double-check the installation to ensure everything is correctly in place. Give the car seat a firm shake from side to side and front to back. It should not move more than an inch in any direction. Check that the recline angle is still within the recommended range. Verify that the harness is properly secured and adjusted for your child.


Installing an Evenflo car seat rear facing is a crucial step in ensuring the safety of your child while traveling. By following the steps outlined in this guide and referring to the instruction manual, you can confidently install the car seat correctly. Remember to always double-check the installation and make any necessary adjustments to ensure a secure fit.


– Evenflo:
– National Highway Traffic Safety Administration: