Introduction
Changing the CVT (Continuously Variable Transmission) fluid is an essential maintenance task for ensuring the longevity and optimal performance of your vehicle’s transmission system. In this article, we will provide a step-by-step guide on how to change CVT transmission fluid, highlighting the materials and tools needed, as well as the procedure to follow. By following these instructions, you can effectively maintain your CVT transmission and avoid potential issues in the future.
Materials and Tools
Before you begin changing the CVT transmission fluid, gather the following materials and tools:
Materials:
– CVT transmission fluid (make sure to use the recommended fluid for your specific vehicle model)
– Drain pan or container to collect the old fluid
– Funnel
– Rags or paper towels
Tools:
– Jack and jack stands (if necessary)
– Socket set
– Wrench
– Screwdriver
– Torque wrench
– Fluid pump (optional)
Procedure
Follow these steps to change the CVT transmission fluid:
Step 1: Preparation
1. Park your vehicle on a level surface and engage the parking brake.
2. If required, raise the front of your vehicle using a jack and secure it with jack stands.
Step 2: Locate the Drain Plug and Fill Plug
1. Consult your vehicle’s owner’s manual to locate the CVT transmission drain plug and fill plug. These are usually found underneath the vehicle.
2. Position the drain pan beneath the drain plug to catch the old fluid.
Step 3: Drain the Old Fluid
1. Loosen the drain plug using a wrench or socket set.
2. Carefully remove the drain plug, allowing the old fluid to drain completely into the drain pan.
3. Clean the drain plug and the surrounding area with a rag or paper towel.
4. Reinstall the drain plug and tighten it to the manufacturer’s specified torque using a torque wrench.
Step 4: Refill with New Fluid
1. Locate the fill plug and remove it using a wrench or socket set.
2. Insert a funnel into the fill hole.
3. Slowly pour the new CVT transmission fluid into the funnel, ensuring that you use the recommended amount specified in your vehicle’s owner’s manual.
4. Allow the fluid to settle and check the fluid level using the dipstick or fill hole. Add more fluid if necessary.
Step 5: Reinstall the Fill Plug
1. Clean the fill plug and the surrounding area with a rag or paper towel.
2. Reinstall the fill plug and tighten it to the manufacturer’s specified torque using a torque wrench.
Step 6: Lower the Vehicle (if applicable)
1. If you raised your vehicle, carefully lower it using the jack.
2. Remove the jack stands and ensure the vehicle is stable before proceeding.
Conclusion
Changing the CVT transmission fluid is a crucial maintenance task that should not be overlooked. By following the step-by-step guide provided in this article, you can ensure the proper functioning and longevity of your vehicle’s CVT transmission. Regularly changing the CVT transmission fluid will help prevent potential issues and keep your vehicle running smoothly.
References
– caranddriver.com
– autoguide.com
– popularmechanics.com
