How to adjust evenflo car seat?

How to adjust evenflo car seat?


Adjusting an Evenflo car seat is crucial for ensuring the safety and comfort of your child during car rides. Proper adjustment ensures that the car seat fits your child securely and provides optimal protection in the event of a collision. In this article, we will guide you through the process of adjusting an Evenflo car seat, covering various aspects such as harness adjustment, recline angle, and headrest positioning.

Adjusting the Harness

Step 1: Start by loosening the harness straps. Locate the harness adjuster strap, usually found at the front of the car seat, near your child’s feet. Pull the adjuster strap to loosen the harness.

Step 2: Place your child in the car seat and buckle the harness. Ensure that the harness straps lie flat and are not twisted.

Step 3: Tighten the harness by pulling the adjuster strap. Make sure the straps are snug but not too tight. You should be able to fit only one finger between the harness and your child’s collarbone.

Adjusting the Recline Angle

Step 1: Check the car seat’s user manual to determine the recommended recline angle for your child’s weight and age. Different car seats may have different recline options.

Step 2: Adjust the recline angle according to the recommended position. Some Evenflo car seats have a recline adjustment lever or knob located at the base of the seat. Others may require you to use a pool noodle or rolled towel to achieve the correct angle.

Step 3: Ensure that the car seat is installed at the correct recline angle. Use a level indicator, if provided, to confirm that the seat is not tilted too far forward or backward.

Positioning the Headrest

Step 1: Check the height and weight limits specified in the car seat’s user manual. Adjust the headrest to the appropriate position based on your child’s measurements.

Step 2: To raise the headrest, squeeze the headrest adjustment handle or button and move it upward until it reaches the desired height. Make sure the headrest is positioned at or just above your child’s shoulders.

Step 3: Double-check that the headrest is securely locked in place and does not wobble or move when pressure is applied.


Properly adjusting an Evenflo car seat is essential for your child’s safety and comfort while traveling in a vehicle. By following the steps outlined in this article, you can ensure that the harness is snug, the recline angle is correct, and the headrest is properly positioned. Remember to always consult the car seat’s user manual for specific instructions and guidelines.


– Evenflo:
– National Highway Traffic Safety Administration (NHTSA):