Introduction
The 4L60E is a popular automatic transmission used in various vehicles. When it comes to maintaining this transmission, one common question that arises is how many quarts of transmission fluid should be used. In this article, we will delve into this topic and provide an in-depth answer.
Understanding the 4L60E Transmission
Before we discuss the amount of transmission fluid required for the 4L60E, let’s briefly understand this transmission. The 4L60E is a four-speed automatic transmission developed by General Motors. It is commonly found in vehicles such as Chevrolet, GMC, and Cadillac.
Transmission Fluid Capacity
The transmission fluid capacity of the 4L60E can vary depending on the specific model and application. However, on average, this transmission requires approximately 11 quarts of fluid for a complete fluid change. This includes both the fluid in the transmission pan and the torque converter.
Fluid Change Procedure
To properly change the transmission fluid in a 4L60E, it is important to follow a specific procedure. Here are the general steps involved:
1. Prepare the vehicle: Park the vehicle on a level surface and engage the parking brake. It is also recommended to warm up the engine to operating temperature before starting the fluid change process.
2. Locate the transmission pan: The transmission pan is typically located underneath the vehicle, towards the rear. It is secured by several bolts.
3. Drain the fluid: Place a drain pan underneath the transmission pan to catch the fluid. Loosen the bolts securing the pan and carefully lower it to drain the fluid. It is important to note that not all of the fluid will drain out, as some will remain in the torque converter.
4. Replace the filter: After draining the fluid, remove the old filter from the transmission and replace it with a new one. The filter is usually located inside the transmission pan.
5. Refill the transmission: Once the filter is replaced, reinstall the transmission pan and tighten the bolts. Locate the transmission fluid dipstick and use a funnel to add the appropriate amount of fluid. Start with around 5-6 quarts and then check the fluid level using the dipstick. Continue adding fluid until it reaches the recommended level.
It is important to consult the vehicle’s owner’s manual or a trusted source for the specific fluid capacity and type recommended for your 4L60E transmission.
Conclusion
In conclusion, the 4L60E transmission typically requires around 11 quarts of transmission fluid for a complete fluid change. However, it is crucial to consult the vehicle’s owner’s manual or a reliable source for the exact fluid capacity and type recommended for your specific model and application.
References
– www.chevrolet.com
– www.gmc.com
– www.cadillac.com
